...video cards. • KVM-switched tiling • Some KVM switches enable you to tile images from as many as four video cameras and/or computer screens on a single display while providing control over individual windows. This application is often used ...
...DisplayPort V1.2 is an extension to the original DisplayPort standard offering many new benefits to the end user. • Benefits: • Double the data rate of the previous DisplayPort v1.1a standard (enabling higher performance 3D stereo displays, higher ...
...to be connected). • An extender or a switch in between? • But what happens if there is an extender or a switch in between? A lot of them do not support DDC at all or only with certain limitations. This may cause PCs not to boot up at all or show no...
...connected). • DDC with extender or switch • But what happens if there is an extender or a switch in between? A lot of them do not support DDC at all or only with certain limitations. This may cause PCs not to boot up at all or show no video. Someti...
...a problem for many KVM switches, as they normally pass along mouse coordinates in a stream mode. This results in a CPU receiving data when it isn’t expecting it, and the mouse simply won’t function properly. • All ServSwitch™ products contain s...
...solution is the new ServSwitch CATx KVMExtender with Built-in De-Skew and Multi Video Support (ACU2xxx series) It provides an individual built-in colour DeSkew of up to 42 ns (42 x 10-9 sec) in steps of 2.8 ns (approximately half a pixel size a...
...20 MBps. Serial-bus and fibre-channel protocols are in development. • NOTE: If you’re going from SCSI-3 to SCSI-2, check your equipment to see if it terminates the 16 unused leads. If not, you’ll need a High-Line Terminator. • SCSI-5, a newer type o...
...speed of fixed optical fibre. • Secure data transmission • LaserLink transmission is one of the safest transmission methods of its type because direct interception is virtually impossible with the concentrated beam and physical placement of the equ...
...indoor use only and are designed to provide protection against falling dirt, circulating dust, lint, fibres and dripping or splashing noncorrosive liquids. Protection against oil and coolant seepage is also a prerequisite for NEMA 12 designation.